Flat rate for programming frequency inverters
Frequency inverters are complex devices with a powerful softare and various possible settings.
To realise the various control tasks a lot of parameters have to be programmed. For an untrained service technican it is hard to keep track of all programming correlations. Even more an incorrect programming may lead to severe malfunctions culminating in the damage of the device.
For this reason we offer technical help in terms of a flat rate for programming according to your requirements. The flat rate includes help for the frictionless setting-up operation of elementary control tasks. Please inform us about your requirements. According to your instructions we either preprogram the frequency inverter for your control task in our factory or we inform you by E-Mail about the correct parameter settings. If desired we can provide a connection diagram or support you on phone when connecting and programming the inverter.
What is included in the programming flat rate?
Included is the programming of parameters for elementary control tasks such as:
- Ramp times
- Maximum frequency
- Start- or cut-off frequency
- Frequency setting with external potentiometer
- Frequency setting with 0 ...10 V signal
- Start-Stop with an external control signal
- Left-right drive
- Control tasks for the digital inputs
- Operation with brake resistor
- Adjustments of the multifunktional button
- Error output selection by relay