Overcurrent protection fuse
According to IEC204-1, EN60204-1, Section 7.2 for protection of the main circuits and control circuits of your electric system
- Cost-efficient overcurrent protection
- Easy to integrate in switches
|Fuses||32 mA, 2 A, 5 A, 8 A, 10 A, 16 A, quick-acting or slow-acting|
Use in Series
K400, K700, K900, K2000/single-phase, K2000/three-phase, K3000/single-phase, K3000/three-phase
This overcurrent protection works with fuses. If unacceptable high currents occur in a control circuit due to overloading or shunt fault, the inserted fuse blows. Downstream leads and equipment are reliably protected.