Preadjustment service for frequency inverter
Frequency inverters are complex devices with a powerful softare and various possible settings.
To realise the various control tasks a lot of parameters have to be programmed. For an untrained service technican it is hard to keep track of all programming correlations. Even more an incorrect programming may
lead to severe malfunctions culminating in the damage of the device.
For this reason we offer technical help in terms of a flat rate for programming according to your needs. The flat rate includes help for the frictionless setting-up operation of elementary control tasks. Please inform us about
your desired control task. According to your instructions we will either preprogram the frequency inverter for your control task in our factory or inform you by E-Mail about the correct parameter settings. If desired we can
provide a connection diagram or support you on phone when connecting and programming the inverter.
What is included in the programming flat rate?
Included is the programming of parameters for elementary control tasks such as:
Ramp times
Maximum frequency
Start- or cut-off frequency
Frequency setting with external potentiometer
Frequency setting with 0 ...10 V signal
Start-Stop with an external control signal
Left-right drive
Control tasks for the digital inputs
Operation with brake resistor
Adjustments of the multifunktional button
Error output selection by relay
Frequency inverters of type INVEOR M require the motor to be controlled for commissioning. If you are
interested in this setting service, then please contact us.