We offer individual ready to connect controls and switching units for your application. Individual items and prototypes can also be projected and produced. Hereby it doesn't matter if a SPS-control or a speed control with frequency inverter is in use. On your request we glady take over the programming and parametrisation.
Features
- Project work and construction according to your specifications
- Professional consulting and maintenance servicing
- In-house machining of plastic and metal housings
- Many cost-efficient housings on order (special housing can also be processed)
- SPS-programming of your control task
- Parametrisation and programming frequency inverters
- Mounting, wiring and testing the control
- Due to our high flexibility we can also offer individual units and prototypes
- Capacity from 0.15 kW up to 160 kW
We would be very pleased to receive your enquiry.
Models and Prices Controls and switching units
| Pos. 1 Art.-No.: 0098.1103 | Speed control for asynchronous motors 2.2 kW (optional in all performance classes available) with frequency inverter AC10, mains switch, emergency stop, potentiometer for speed control, start-stop-keypad, operating and error indicator lights | Price incl. VAT | |
|---|---|---|---|
 | Housing | Metal housing 400x400x250 mm | € 1.140,27 Get a quote In Stock: 0 |
| Mains connection | 3 P+N+E 400 V 16 A Terminal blocks for mains connection | ||
| Maximum motor power | 2.2 kW Other performance classes on request | ||
| Frequency inverter | AC10 | ||
| Control voltage | Uc: 230 V/50 Hz | ||
| Control elements | Start-Stop-keypad, potentiometer, emergency-stop, mains switch | ||
| Indicators | Operating LED for mains and error | ||
| Lines in | Mains lead 1x M 20 Motor connection 1x M 20 Dummy plug 1x M 16 | ||
| Technical drawings | Wiring diagram | ||
| Dimensional drawing | |||
| Further changes on request | |||
| Pos. 2 Art.-No.: 0098.1104 | Speed control for asynchronous motors 4.0 kW (optional in all performance classes available) with frequency inverter AC10, mains switch, emergency stop, potentiometer for speed control, start-stop-keypad, operating and error indicator lights | Price incl. VAT | |
|---|---|---|---|
 | Housing | Metal housing 400x400x250 mm | € 1.170,95 Order In Stock: 1 |
| Mains connection | 3 P+N+E 400 V 16 A Terminal blocks for mains connection | ||
| Maximum motor power | 4.0 kW Other performance classes on request | ||
| Frequency inverter | AC10 | ||
| Control voltage | Uc: 230 V/50 Hz | ||
| Control elements | Start-Stop-keypad, potentiometer, emergency-stop, mains switch | ||
| Indicators | Operating LED for mains and error | ||
| Lines in | Mains lead 1x M 20 Motor connection 1x M 20 Dummy plug 1x M 16 | ||
| Technical drawings | Wiring diagram | ||
| Dimensional drawing | |||
| Further changes on request | |||
| Pos. 3 Art.-No.: 0098.1107 | Speed control for asynchronous motors 7.5 kW (optional in all performance classes available) with frequency inverter AC10, mains switch, emergency stop, potentiometer for speed control, start-stop-keypad, operating and error indicator lights | Price incl. VAT | |
|---|---|---|---|
| Housing | Metal housing 400x500x300 mm | € 1.350,02 Order In Stock: 1 |
| Mains connection | 3 P+N+E 400 V 16 A Terminal blocks for mains connection | ||
| Maximum motor power | 7.5 kW Other performance classes on request | ||
| Frequency inverter | AC10 | ||
| Control voltage | Uc: 230 V/50 Hz | ||
| Control elements | Start-Stop-keypad, potentiometer, emergency-stop, mains switch | ||
| Indicators | Operating LED for mains and error | ||
| Lines in | Mains lead 1x M 20 EMV-cable gland 1x M 20 for motor Dummy plug 1x M 16 | ||
| Technical drawings | Dimensional drawing | ||
| Wiring diagram | |||
| Further changes on request | |||
| Pos. 4 Art.-No.: 0098.1124 | Speed control for asynchronous motors 4.0 kW (optional in all performance classes available) with frequency inverter AC10, mains switch, keypad mounted in door, external control box for L-0-R-run and speed control with 5 m lead, 3 m mains lead H07RN-F 5G1.5 with mounted CEE-plug | Price incl. VAT | |
|---|---|---|---|
 | Housing | Metal housing 300x400x250 mm | € 1.170,95 Order In Stock: 1 |
| Mains connection | 3 m mains lead H07RN-F 5G15 With CEE-plug 16 A/400 V | ||
| Maximum motor power | 4.0 kW Other performance classes on request | ||
| Frequency inverter | AC10 | ||
| Control voltage | Uc: 230 V/50 Hz | ||
| Control elements | External control box L-0-R and potentiometer for speed control | ||
| Indicators | Keypad with display mounted in door | ||
| Lines out | EMV-cable gland 2x M 20 for motor | ||
| Technical drawings | Wiring diagram | ||
| Dimensional drawing | |||
| Further models on request | |||
| Pos. 5 Art.-No.: 0300.8000 | Speed control and operation with a radio system, Start-Stopp - speed adjustment - direction of rotation controllable by radio system | Price incl. VAT | |
|---|---|---|---|
 | Setup | AC10 IP66 with attached components | On request |
| Frequency inverter | AC10 IP66 | ||
| Capacity | 0.4...15 kW | ||
| Mains connection | 1 Ph / 220-240 V or 3 Ph / 380-480 V | ||
| Supply cable | H07RN-F 4Gx____ 2 m Cable cross-section depends on capacity | ||
| Motor connection cable | Shielded JZ-600 4G___ 2 m | ||
| Radio control | TYRO-LYRA / HYDRUS or MUSCA / AQUARIUS | ||
| Frequency: 868 MHz | |||
| Response time: < 0.1s | |||
| Operating voltage receiver: 8-30 V DC | |||
| Battery sender: 9 V | |||
| Ambient conditions sender: -20° C / 60° C Ambient conditions receiver: -40° C / 85° C | |||
| Range free field: 300 m | |||
| Degree of protection sender: IP 65 Degree of protection receiver: IP 68 | |||
| Dimensions (LxBxT) Sender: 93x60x30 mm Receiver: HYDRUS: 62(+69 with aerial)x104x30 mm AQUARIUS: 90(+87 with aerial)x150x30 mm | |||
| Hand-held transmitter models: MUSCA 2,4 or 6 buttons + ON/OFF + Stop button (Specify with your request) | |||
| Cable length receiver: 1.3 m | |||
| ID Security code: Unique 24-Bit ID (16 million combinations) | |||
Examples
Below you find a small range of many possible implementations.
Please contact us. We would be very pleased to receive your enquiry.
| Exterior view | Interior view | Specification |
|---|---|---|
 |  | Small control for workstation with 2-hand control. Increased safety through 2-channel safety circuits with protective contact monitoring. Left - 0 - right switching, cycle scan by proximity switch and start inhibit by time relay. |
 |  | Small control for speed adjustment of a 3kW extraction system. Control of a 0.75kW cutting module with switchable, pulsed oiling and connection option for an ionization system. All components with UL approval. |
 |  | Control for fan system with connected load 15kW Case fan controlled by thermostat, indication of pressure deviations from external pressure switch, manual - 0 - automatic switching for external or local start signal. |
| Speed control and operation with a radio control system, Frequency inverter Ac10 IP66, capacity 0.4...15 kW, Degree of protection IP 66, ready for connection. Optional with built-in mains switch, selector switch for mode of operation, industrial plug connection among others. | |
 |  | Fan controller with frequency converter for 4kW fans. Manual / automatic switching with signaling of operating states. Control for automatic filter cleaning with adjustable overrun time and pushbutton for manual cleaning. Control for remote start or switching to local start of the system. Pressure monitoring with signaling in case of deviations. |
 |  | Control for 22kW material extraction with control for 2 cutting modules. Siemens logic modules for controlling the level monitoring of waste containers with control for material diverter and automatic, time-delayed shutdown. Signaling of the fill level with button for acknowledgment after container emptying. Monitoring the lubrication of the cutting system with automatic, time-delayed shutdown. |
 |  | Fan controller with frequency converter for 5.5 kW fan. Manual / automatic switching with signaling of operating states. |
 |  | Control box for controlling 2 external IP66 AC10 frequency inverters. Start-stop of the inverter. Level detection with time-delayed switch-off and signaling to external signal lights. Power supply of external FUs for central shutdown. |
 |  | Small controller for rim polishing machine. Control for two 0.75kW motors. PLC control with Panasonic FPX and touch panel for time-controlled sequence programs. Automatic forward / reverse switching. Automatic program run with ready message. Signaling of the operating conditions by signal tower. |
 |  | Heating control with transformer with multi-range voltage 230-380-400-440-480-650 V and fan control |
 |  | Switching unit with connecting lead 42 kW Connection and control for 2 speed controlled drives 37.0 kW + 4.0 kW, switch disconnector 125 A, pre-fuse |
 |  | Switching unit with connecting lead 50 kW Connection and control for 3 speed controlled drives 2x 22.0 kW + 1x 4.0 kW, switch disconnector 125 A, pre-fuse |
 |  | Control for a speed-controlled drive with frequency inverter and additional electronic brake according to GS-HO-01 mounted in a metal housing with integrated fan IP54 |
 |  | Control for a speed-controlled fan drive with frequency inverter and STO (Save-Torque-Off), switch-mode power supply and undervoltage release mounted in a metal housing with integrated fan IP54 |
 |  | Softstarter with motor protection switch and mains switch mounted in metal housing |
 |  | Control for 2 drives with softstart, undervoltage release, overload relais, control transformer mounted in a metal housing |
 |  | Rotation speed controlled fan control with emergency stop functionality, thermistor relay and operation mode display |
 |  | Control with frequency inverter AC10 and external control housing with potentiometer and changeover switch L-0-R |
 |  | Speed control with emergency stop and mains switch, door mounted start-stop, speed controller, emergency stop and operating indicator lights |
 | Control for 2 drives with frequency inverter, control by digital inputs mounted in a metal housing with integrated fan IP54 |