My account
Login / Register
Switch-on automatic 1Ph-230V
Automatic Starter 1Ph with power supply cable
with CCST control board, selector switch Hand-0-Auto for extraction; Total load: 16A or 3.6kW, max. output load: 3.0kW
Item No. 0098.3947
Features
- Plug & Play, no installer required
- Convenient start-up for extraction systems
Please Note
To ensure functionality, the extraction system must not have an undervoltage trip.
Each master socket independently activates the two slave sockets
.Versions
| Item No. | Delivery Time | Stock | Quantities / Prices |
|---|---|---|---|
| 0098.3947 | 1 day(s) | 4 |
Technical Features
Series Specifications
Input voltage
230V/50Hz
total load
16A or 3.6kW
Max. power master
16A
max. output load
3.0kW 230V/AC-3
Please note
The permissible total connection power of the master and slave must not exceed the specified total load.
Pre-insurance (by the construction side)
16A gl/gG
Max. switching frequency
20 per hour
Ambient temperature
-10°C...+40°C
Degree of protection
Housing IP54, socket IP44
Individual Parameters
Network connection
3 m long power cable H07RN-F 3G1.5 with protective contact plug
Adjustable switching times
Yes
Mode selector switch
Yes
Number of master outlets
1x protective contact socket 2P+E 230V
Number of slave sockets
1x protective contact socket 2P+E 230V
Contactor for slave
KLIBO KB-04
switch-on threshold
~0.1 ... 0.6A adjustable
shut-off threshold
~0.1 ... 0.4A
Turn-on delay
~0.5 ... 8s adjustable
Power-off delay
~0.1 ... 12s adjustable
Mounting tabs
Yes
Dimensions
207x106x108 mm
Weight approx.
1.32 kg
Manufacturer
Klinger & Born GmbH, In den Schlangenäckern 5, DE - 64395 Brensbach
Function description
Turn-on delays are used to switch electrical motors or other inductive loads on and off with a delay. This is an important feature to ensure a smooth startup. High inrush currents occur when switching on electrical motors, which can be about six times the rated current. If two motors are switched on simultaneously, the starting currents may reach a level that could trigger the upstream fuse. To prevent this, the second drive is switched on with a time delay using a turn-on delay. This has the added advantage that the second drive automatically turns on after about 3 seconds without any further operation and automatically turns off after the main drive is switched off. This is a useful feature for extraction systems and much more. Through the optional Auto-0-Manual switch, the extraction (Slave) can also be activated when the saw (Master) is not turned on. Each master socket independently activates the two slave sockets.
