SPS and touch terminals

Features

• Fastest command processing
• 0.32µs for a basic command
• (1.9 ms cycle time for 5000 program steps)
• Large program memory
• 32000 program steps with sufficient comment storage
• High expandability with a variety of options
• Max. 300 I/Os and additional functions with the expansion cartridges
• High security
• Program protection with an 8-bit password and a function to prevent uploads
• Up to 3 serial communication interfaces per CPU
• Using the communication cartridges, up to 3 serial communication interfaces can be utilized (RS232C/RS485)
• Integrated USB interface
• Simple and direct connection to a PC via USB cable (Type AB)
• Master Memory functional cartridge with real-time clock
• Program updates can be made simply by replacing the Master Memory cartridge
• The built-in real-time clock allows for the recording and storage of data with timestamps
• Simultaneous 2x2 axis interpolation
• Multi-point PID control
• Technically advanced algorithms and floating-point processing enable highly precise PID control
• Compatible with all FP-series controllers from Panasonic
• The FP-X series is, of course, programmed with the FPWINPro software according to IEC 61131-3 under Windows, like all Panasonic controllers

For more complex control tasks, we use PLC controllers of the FP-X type from Panasonic. The 3 CPU types are available with 14, 30, and 60 I/O and up to 32000 program steps. Special expansion cartridges allow flexible adaptation of the control, for example, analog I/O, memory expansion, fast counters, or pulses. An adapter also allows the connection of FP-0 expansion modules for special functions. In conjunction with touch terminals, both signal and parameter inputs can be entered across multiple menu pages, and the operating states of the system can be visualized. Programming is done according to IEC61131-3. The controller is characterized by fast command processing and can also be expanded to a maximum of 300 I/Os afterwards.