My account
Login / Register
Automatic starters 1-phase-230V
Description
Features
- Plug & Play, no installer required
- Convenient start-up for extraction systems
Please Note
To ensure functionality, the extraction system must not have an undervoltage trip.
Each master socket independently activates the two slave sockets
.Series Specifications
Input voltage
230V/50Hz
total load
16A or 3.6kW
Max. power master
16 A
max. output load
3.0kW 230V/AC-3
Please note
The permissible total connection power of the master and slave must not exceed the specified total load.
Pre-insurance (by the construction side)
16 A gl/gG
Max. switching frequency
20 per hour
Ambient temperature
-10°C...+40°C
Degree of protection
Housing IP54, socket IP44
Function description
Turn-on delays are used to switch electrical motors or other inductive loads on and off with a delay. This is an important feature to ensure a smooth startup. High inrush currents occur when switching on electrical motors, which can be about six times the rated current. If two motors are switched on simultaneously, the starting currents may reach a level that could trigger the upstream fuse. To prevent this, the second drive is switched on with a time delay using a turn-on delay. This has the added advantage that the second drive automatically turns on after about 3 seconds without any further operation and automatically turns off after the main drive is switched off. This is a useful feature for extraction systems and much more. Through the optional Auto-0-Manual switch, the extraction (Slave) can also be activated when the saw (Master) is not turned on. Each master socket independently activates the two slave sockets.
