My account
Login / Register
Rotation direction monitoring with phase failure detection
Direction of rotation monitoring 400V
Replaced by 8700.6003
Item No. 8700.6000
According to DIN EN60204-1 Sec 7.8, a rotational field monitoring system must be provided where an incorrect rotational field of the supply voltage can cause a hazardous condition or damage to the machine.
Special Features
- Optimal protection against starting in the wrong direction
- Starting block in case of a missing phase in the power supply
- Effective protection for both people and machines
- Cost-effective as it is supplied complete
Operating conditions that could lead to an incorrect rotational field include:
- A machine being switched from one power supply to another
- A mobile machine with a connection option for an external power supply
Versions
| Item No. | Delivery Time | Stock | Quantities / Prices |
|---|---|---|---|
| 8700.6000 | On request | 0 |
Technical Features
Series Specifications
Function
Direction of rotation and phase failure detection
Voltage tolerance
+/- 10%
Output signal
Potential-free changeover contact NC-COM-NO
Response time
approximately 200ms
Switching power
1920VA
Switching voltage
250V AC
Open contact test voltage
1000V AC
Test voltage contact - coil
5000V AC
switching current
8A 250V~
Mechanical lifespan
5x106 switching cycles
Contact type
switch (NC-COM-NO)
Contact assignment
COM-NC normally closed = Fault; COM-NO normally open = Good
Self-consumption
approximately 1.4W
Self-consumption execution 8700.6008
approximately 0.7W
Switching states "GOOD"
COM-NC open, COM-NC closed
Switch states "ERROR"
COM-NC closed, COM-NO open
Individual Parameters
Input voltage
3-phase 400V/50Hz
Status display
No
Dimensions (LxWxH)
75 x 55 x 22 mm
Manufacturer
Klinger & Born GmbH, In den Schlangenäckern 5, DE - 64395 Brensbach
Function description
Direction locks are used in machines where starting in the wrong direction poses a danger to the drive, the production material, or the operating personnel. Such drives can be, for example, conveyor belts in production facilities, mixing devices for mortar and similar materials, or gearbox units.
To securely protect such drives from starting in the wrong direction, there is the option to implement direction locks in the K900 and K3000 switch series 3Ph, DIN rail enclosures, and special enclosures. This control board detects the correct direction of rotation and whether all phases are present once the mains voltage is applied. With the correct phase sequence, an output relay is activated. Through this output relay, the voltage release of the control circuit is executed, thereby enabling the readiness of the ON-OFF switch. If the rotational field is incorrect, the motor cannot be switched on.
A phase failure during motor operation cannot be detected. Upon request, the switch can be equipped with an optical or acoustic indicator.